A command is an element of a playlist or a break or a schedule item. To add commands to a playlist or to breaks you should use PlaylistCommandAdd or BreaksCommandAdd methods.
Parameters of command:
- Name
(for example, "stop", "pause", "play") - Additional parameters
They can be simple parameters (for example, 1.0) or attributes (for example, track=1 ramp=10.0). - Target object
It is an object that executes the command (for example, DeckLink Renderer). If this parameter is not specified then the current upper-level object executes the command. For example, if you have a break in a playlist item (MItem object) then the playlist (MPlaylist object) executes the command.
To set a command you should get an item (from a playlist or from a break) and use ItemCommandSet method.
To check the command you should go through this workflow:
- Get the command through BreakGetByIndex, PlaylistGetByIndex.
- Call
pCommand.ItemCommandExecute(pPlaylist).
Here is example of how to add command to playlist:
MItem pItem;
int nIndex = -1;
m_pPlaylist.PlaylistCommandAdd("pause", "", null, ref nIndex, out pItem);
pItem.ItemCommandSet("pause", "10", null); // to pause for 10 seconds
List of commands
| Command | Basic parameters | Complex parameters | Description |
|---|---|---|---|
| start | Starts file/playlist/live or renderer (in this case pTargetObject is used). | ||
| pause | time (1.0) | time=1.0 | Pauses file on a specified time (in seconds). If the command is placed in the playlist then pause will be on the first frame of the next item. |
| pause_last | time=1.0 | Pauses playback on the last frame of the previous file. If there is no out-point for the previous file then the time parameter is not supported. | |
| stop | time (1.0) | time=1.0 | Stops playlist (background will be displayed) at a specified time (in seconds). |
| rate | rate (2.0) | rate=2.0 | Changes the rate of playback. |
| skip | time (5.0) | time=5.0 | Only for breaks This command skips the specified time (in seconds). |
| cg | controls CG. | ||
| mute | true/false | mute=true track=-1 channel=-1 ramp=0.1 |
Mutes specified a channel of the specified track. The ramp is the time of change (in seconds). If Channel/Track is set as "-1" then all channels/tracks should be muted. |
| gain | sound level (-20.0) | track=-1 channel=-1 ramp=0.1 |
Changes sound level of the specified channel of the specified track. If Channel/Track is set as "-1" then the sound level should be changed of all channels and all tracks. |
| audio | gain=0.0 mute=true track=-1 channel=-1 ramp=0.1 |
Changes/mutes the specified channel of the specified track. If Channel/Track is set as "-1" then all channels/tracks should be changed /muted. |
|
| audio-track | track number (1) | track=0 mode=enabled-exclusive add-to=0 add-gain=0.0 |
Switches between audio tracks ( sets the mode of the specified track. See IMAudio for details). All tracks or required tracks should be selected because switching occurs through IMAudio. For example, audio_tracks=-1 or audio_tracks=1,2 This command doesn’t change tracks selected from file (e.g. using PropsSet( file::audio_track, “x” )). |
| loop | number of the last files (0) | files=0 | Loops some last files. |
Still have questions?
Tell us what didn’t work or what you’d like clarified.