Input properties
The properties that are specific to MLive and MFLive objects.
| Name | Default value | Description |
|---|---|---|
| show_timecode | false | Once enabled, shows timecode on an input signal |
| timecode_type | auto | Specifies the type of output timecode. Possible values:
|
| audio_input_source | 2 | Specifies input audio source. Possible values:
|
Output properties
The properties that are specific to MRenderer and MFRenderer objects
| Name | Default value | Description |
|---|---|---|
| input.buffers | 1 | Sets the maximal size of an input buffer in frames |
| keying_input_channel | 1 | Sets default input channel for keying. |
| keying_over_black | false | Enables keying over black input |
| keying_use_input_ancillary | true | Once enabled, it uses input ancillary data in keying mode |
| show_timecode | false | Once enabled, shows timecode on frames |
| output.buffers | 1 | Set the maximal size of the output buffer in frames |
| output.anc_packets | false | Once enabled, uses ANC packets for output |
| output.vanc | true | Enables VANC data output |
| cc_line_sdi | 9 | Specifies the output line for Closed Captions data. |
| cc_offset_dword | 0 | Sets dword offset for Closed Captions output. |
| genlock_source | auto | Genlock input source. Warning: modifying the property for Neutron card can result in onboard keying and SDI output failures. Possible values:
|
| bypass_A.enable | false | enables bypass relay for channel A |
| bypass_B.enable | false | enables bypass relay for channel B |
| renderer_mode | 1 | Sets a rendering mode: 0 - FIFO; 1 - FRAMESTORE; |
Still have questions?
Tell us what didn’t work or what you’d like clarified.